10 PSA Rules Every Haulier Must Know

by | Nov 5, 2026 | Happenings | 0 comments

Focus question: What do I need to drive a rented van, lorry or prime mover into a PSA terminal?

Your vehicle is booked. The job is due at Pasir Panjang. Your driver pulls up to the gate, and the barrier stays down.

The vehicle is fine. The paperwork is not.

PSA terminals are restricted areas. Every person, every vehicle and every permit is checked before you get in. That is true whether you are sending a van with ship supplies, a 24ft lorry with project cargo or a prime mover hauling a 40ft container. If you are renting to cover a port contract, a busy season or a gap in your fleet, those checks apply from day one. A rented vehicle gets no grace period.

This guide covers the 10 PSA requirements and regulations to sort out before your first trip. It is written for fleet managers, hauliers, ship suppliers and SME owners who rent vans, trucks or prime movers in Singapore. Every rule below comes from PSA’s own circulars and port users FAQ, current as of November 2026.

The quick answer

To enter a PSA terminal with any rented commercial vehicle, you need a PSA Pass for every person on board, a driver with the right licence, a Commercial Vehicle Entry Permit (CVEP), the vehicle’s log card and lease papers, and full PPE. Lorries must also carry a speed limiter compliance label where Traffic Police rules require one. Prime movers moving containers need a driver who has passed PSA’s Prime Mover Driving course.

Which rules apply to your vehicle?

Requirement

Van

Lorry (10ft to 24ft)

Prime mover

PSA Pass for everyone on board

Yes

Yes

Yes

CVEP or Temporary CVEP

Yes

Yes

Yes

Log card and lease papers

Yes

Yes

Yes, plus ULW and MLW

Speed limiter compliance label

Only if MLW is 3,501kg to 12,000kg

Yes, if MLW is 3,501kg to 12,000kg

Outside this rule’s weight band

PSA Prime Mover Driving course

No

No

Yes, for container work

Gate at Tuas Port

Commercial Gate

Commercial Gate

Commercial Gate when not carrying containers

Why PSA rules hit rental fleets harder

PSA’s restricted areas are governed by the Protected Areas and Protected Places Act and the Free Trade Zones Act. Driving in without valid passes and permits is an offence.

For businesses using commercial vehicle rental in Singapore, the real cost is time. A permit applied for late means a van or truck you are already paying for sits idle. Rental and permit timelines need to line up, so it pays to know these rules before you sign.

1. A PSA Pass for every driver and passenger

Every person entering PSA’s restricted areas needs a valid PSA Pass or PSA Temporary Pass. PSA’s permit form is clear: entering without a valid pass for every driver and passenger, plus a valid vehicle permit, is an offence.

A sponsored PSA Pass is valid for up to one year or three years and is personal to the holder. Applicants must be over 16, and over 18 for operational work.

Rental tip: Your rental company supplies the vehicle. Your company sponsors the people. Start pass applications the day you confirm your rental, not the day the vehicle arrives.

2. The right licence for the vehicle

PSA follows the Road Traffic Act and Traffic Police guidelines for drivers. Work Permit holders must also meet Ministry of Manpower requirements. In short, your driver needs a valid licence for the class of vehicle they are driving.

  • Vans and light lorries: Most fall under a Class 3 licence. Heavier lorries need a higher class, so check the vehicle’s weight against the licence. Our guide to changes to the Class 3 licence explains the limits.
  • Mini buses: When applying for a CVEP for a coach, bus or mini bus, PSA asks for the driver’s valid Vocational Licence issued by LTA.
  • Prime movers: For container movement, the driver needs a Class 4 licence and must have passed PSA University’s Prime Mover Driving course (skill code “P”). Breakbulk-only drivers need Class 4 but not the course, and cannot use the Container Flow Through Gate.

Rental tip: Skylink rentals are self-drive. You bring the driver, so check their licence before the job starts. Our guide on what to check before you sign a rental agreement covers this in more detail.

3. A Commercial Vehicle Entry Permit (CVEP)

A CVEP is PSA’s entry permit for a commercial vehicle. Think of it as the vehicle’s own pass, issued to your company for one specific plate.

Every commercial vehicle entering PSA’s restricted areas needs a PSA CVEP. That includes vans, lorries, mini buses and prime movers. A full CVEP is valid from one to five years. A Temporary CVEP lasts from one to 14 days.

The permit shows your company name, vehicle number and expiry date, and must be clearly displayed on the vehicle. PSA advises applying about one month before your planned entry date.

Rental tip: Match the permit to your rental term. A Temporary CVEP suits a one-week van rental for a ship supply job. A full CVEP makes more sense for a fleet of lorries on long-term truck leasing in Singapore.

4. Log card and lease papers

This is the requirement rental users miss most often.

When you apply for a CVEP on a leased vehicle, PSA asks for the Vehicle Log Card and supporting documents. For prime movers, you must also declare the Unladen Weight (ULW) and Maximum Laden Weight (MLW). Our article on knowing your vehicle’s true capacity explains how these weights work.

Rental tip: Ask your rental provider for a copy of the log card and your lease documents when you book. Having them ready can save a week of back and forth.

5. Pre-registered vehicle number and IU

PSA Pass holders can drive into port premises only if the vehicle number and IU number have been pre-registered. PSA keeps the right to approve or reject access for any vehicle.

Rental tip: This matters when a vehicle goes for repair. If you switch to a replacement van or truck, its plate and IU must be registered before it enters the port. Plan this with your rental provider so a swap does not stop your port runs.

6. A speed limiter compliance label on lorries

This one is new, and it is strict. In January 2026, PSA began checking the speed limiter compliance label on lorries entering its restricted areas. Lorries that do not meet the requirement are denied access.

The rule covers lorries with an MLW of 3,501kg to 12,000kg, which must be limited to 60km/h. Traffic Police is phasing it in:

Lorry type

MLW

Applies from

Registered before 1 Jan 2018

5,001kg to 12,000kg

1 January 2026

Registered before 1 Jan 2018

3,501kg to 5,000kg

1 July 2026

Registered on or after 1 Jan 2018

5,001kg to 12,000kg

1 January 2027

Registered on or after 1 Jan 2018

3,501kg to 5,000kg

1 July 2027

Rental tip: Before you book a 10ft, 14ft or 24ft lorry for port work, confirm it carries the compliance label. Our guides on the speed limiter deadline and keeping your fleet LTA compliant have the details.

7. A haulier code and bizSAFE, where they apply

Container jobs at PSA run through Portnet, PSA’s nationwide business-to-business port community system. Hauliers register for a PSA haulier code, which lets them check vessel details and request container releases.

If your company takes on contracts where work is carried out on PSA premises, PSA also requires at least bizSAFE Level 3 certification. This is a workplace safety programme run under the Workplace Safety and Health Council.

Rental tip: Get your codes and system access sorted while your rental is being prepared. A vehicle is only useful once your team can book jobs.

8. Basic PPE every time you step out

PSA’s February 2026 circular makes basic PPE mandatory in all operational areas. It must be worn properly and securely, whether you drive a van or a prime mover.

PPE item

PSA requirement

Standard

Head protection

Safety helmet with chin strap

SS 98 / EN 397

Visibility

High visibility vest

ISO 20471

Foot protection

Safety footwear

SS 513 / ISO 20345

Near water

Personal flotation device (life jacket zones)

Per WSH guidelines

Since 1 August 2025, not wearing a helmet or a high visibility vest is a Very Serious offence: 8 demerit points and a $300 charge.

Rental tip: Keep a spare helmet and vest in every vehicle that goes to the port.

9. Speed limits and PSA demerit points

The speed limit on main port roads is 40km/h. From July 2026, a 300-metre slow-down zone at 25km/h also applies along Pasir Panjang Terminal (PPT) Link, between Commercial Gate 4 (Incoming) and the Singapore Customs Scanning Station. It starts at two red bars painted on the road.

PSA runs its own demerit system, separate from the Traffic Police one:

Tier

Demerit points

Charge

Speeding example (outside wharves)

Warning (W)

0

$0

1 to 10km/h over

Less Serious (L)

2

$75

11 to 20km/h over

Serious (S)

4

$150

21 to 30km/h over

Very Serious (V)

8

$300

More than 30km/h over

On wharves (chassis lanes and backreach), going 1 to 10km/h over is Serious, and anything more is Very Serious. Since 1 June 2025, some offences go further:

  • Using a mobile device while driving: 12 points and $300, plus a one-week suspension for a first offence and one month for a second. The driver must pass a safety assessment before access is restored.
  • Not wearing a seatbelt (or not ensuring passengers do): 8 points and $150.
  • Ignoring traffic light signals: 12 points and $300.

Prime mover drivers are also not allowed to carry passengers through PSA’s Flow Through Gate.

Rental tip: A suspended PSA Pass means a parked vehicle. Since rentals are self-drive, keep a backup PSA-qualified driver on your roster. For road rules outside the port, see our guides to the new 2027 demerit points rules and heavy vehicle blind spots.

10. Use the right gate at Tuas

Since 3 November 2025, all non-container vehicles must enter and exit Tuas Port through the new Commercial Gate, reached via Tuas South Avenue 5. They can no longer use Tuas Terminal Gateway (TTG). That covers every van and lorry, and any prime mover running without a container.

PSA is also testing Intelligent Guided Vehicles (IGVs) at Tuas Terminal 2. Watch for signs and follow terminal instructions in these areas.

Rental tip: Brief your driver on the route before day one, especially if they usually work at Pasir Panjang.

Renting vans, trucks and prime movers for port work

Once the paperwork is handled, you need a vehicle that is ready when your permits are. Skylink’s rental fleet covers every type of port job:

Here is what comes with a Skylink rental:

  • Short to long-term terms, so your rental can match a single contract or a full year
  • An in-house commercial vehicle workshop open six days a week for servicing and repairs
  • 24/7 roadside assistance and emergency towing
  • A replacement vehicle during extended repairs, so your port runs keep moving
  • A fleet of 1,000+ vehicles and experience in commercial vehicle leasing since 2017

Renting also keeps capital free for your business. Our article on why leasing makes sense when COE is high explains the numbers. Not sure which size fits the job? Read how to pick the right van or truck.

One thing to note: overnight parking and Vehicle Parking Certificate (VPC) matters stay with the renter. If you are new to this, read what a VPC is and our update on overnight heavy vehicle parking.

The bottom line

PSA’s rules exist for good reason. Ports are busy, heavy and unforgiving. Most entry problems come down to timing: passes, permits, labels and documents not ready when the vehicle is.

Get the 10 items above in order, and your rented van, lorry or prime mover can go to work from day one. Skylink handles the vehicle and its upkeep. You bring the qualified driver and the permits.

Ready to plan your next port job? Contact Skylink or chat with us on WhatsApp at 9233 5858 for rental availability.

Rules in this article are taken from PSA Corporation circulars and the PSA Port Users FAQ. Requirements can change, so always confirm the latest with the PSA Pass Centre before entry.

FAQ

Can I drive a rented van or truck into a PSA terminal? Yes. The vehicle needs a PSA Commercial Vehicle Entry Permit (CVEP), and every person on board needs a valid PSA Pass or Temporary Pass. For leased vehicles, PSA asks for the log card and supporting lease documents.

Do lorries need a speed limiter to enter PSA? Yes, if the lorry’s MLW is between 3,501kg and 12,000kg and its Traffic Police deadline has passed. PSA checks the speed limiter compliance label and denies access to lorries that do not comply.

What licence do I need to drive a prime mover at PSA? A Class 4 Singapore driving licence. To move containers, the driver must also pass PSA University’s Prime Mover Driving course (skill code “P”).

How long is a PSA CVEP valid? A full CVEP is valid for one to five years. A Temporary CVEP is valid for one to 14 days, which suits short-term rentals.

Which gate do vans and lorries use at Tuas Port? The Commercial Gate via Tuas South Avenue 5. Since 3 November 2025, non-container vehicles can no longer use Tuas Terminal Gateway.

What PPE is required inside PSA terminals? A safety helmet with chin strap, a high visibility vest and safety footwear. A life jacket is also required in life jacket zones near water.

What is the speed limit inside PSA? 40km/h on main port roads. A 25km/h slow-down zone applies along a 300-metre stretch of Pasir Panjang Terminal Link.

Does Skylink provide drivers with its rentals? No. Skylink rentals are self-drive. You supply a qualified driver, and Skylink supplies and maintains the vehicle.